Carpro / Cleaning

CarPro HydroFoam, 500ml

whatsappIcon
$175.00
Carpro / Cleaning

CarPro HydroFoam, 500ml

whatsappIcon
$175.00

Use HydroFoam, wash & coat your vehicle at once

  • pH Neutral - gently lift the dirt and grime from the surfaces
  • Versatile - can be used on many surfaces
  • Instant vehicle release - No cure time needed
  • Durable - enhance gloss and long-lasting hydrophobic function that repels dirt and water from the surface of 3 months or more
  • Resistant - highly resistant to nearly all acids, alkaline solutions, and solvent

CarPro HydroFoam is a revolutionary product that allows you to wash and coat your vehicle with protection in one easy step! Formulated with pH Neutral surfactants, this 2-in-1 innovative shampoo designed to gently lift and remove dirt from solid surfaces. Together with a special lifting lubricant, HydroFoam allows you to safely wash the surfaces with ease and greatly reduces the risk of washing induced swirls and scratches.

HydroFoam is an amazing rich foam, it works well with CarPro Merino Wool Wash Mitt and it can be safely rinsed away. Besides, HydroFoam combines the coating properties of Hydrophilic glass fibers and fluoropolymers, during the rinse phase, the “Hydroelectric bonding” function is activated, creating an incredibly durable silica shell which is easy to maintain and resistant to nearly all acids, alkaline solutions, and solvents, leaving an ultra-water-repellent, protected shine and glossy coat with significant UV protection to most solid vehicle surfaces for up to 3 months. CarPro Hydro Foam is extremely versatile, it can be used on paint, glass, plastic, wheels, calipers, wheel wells, and more. With no cure time necessary, you can use your vehicle right after the wash, it is clean and timesaving!

Precautions:

  • Do not apply HydroFoam in the sun or to a hot surface
  • In shaded location rinse the vehicle of all grit

Step By Step:

Directions by hand:

  1. Rinse vehicle
  2. Spray HydroFoam (diluted 1:9) from a spray bottle onto panel(s) OR apply small amount directly to wet Microfiber wash mitt and spread
  3. Wash with mitt as usual
  4. Rinse mitt and panel
  5. Move to next panel(s)and repeat the steps above
  6. Rinse the entire vehicle well
  7. Dry any remaining water by blowing off and or with a drying Microfiber towel
  8. Directions with Foam Cannon:

Dilute 1:9 in Foam Cannon

  1. Foam surface, do not allow to dry on surface
  2. Wash with mitt as usual, rinsing after each panel
  3. When the cleaning is finished, rinse entire vehicle very well
  4. Remove any remaining water with a drying Microfiber towel
0.2.93 © 2013-2023 Nice Car HK Limited