3D / Polishing

3D ACA 500 X-tra Cut Compound, 32oz

whatsappIcon
$450.00
3D / Polishing

3D ACA 500 X-tra Cut Compound, 32oz

whatsappIcon
$450.00

True paint perfection with low heat, high speed leveling

  • Utilizes low heat, high speed leveling, thanks to the Alpha - Ceramic Alumina abrasive technology
  • Works well on soft or hard coat, and even clearcoats and single stage paint
  • Cuts P1000 or finer sanding scratches without using fillers, silicones, solvents or kerosene
  • Easy to use and easy for cleanup
  • Use with rotary or dual action polisher together with wool or foam pad of your selection

3D ACA X-Tra Cut Compound is an extremely versatile paint correction compound infused with Alpha Ceramic Alumina abrasive technology. This revolutionary new abrasive outperforms standard abrasives, not only because it corrects swirls and scratches faster, but it generates much less heat during the leveling process, which allows it to work longer in order to tackle the most challenging clearcoats and single stage paint much better.

Instead of hiding the scratches and swirls with the use of fillers or silicones, 3D ACA X-Tra Cut Compound provides cutting power equivalent to p1000 grit sanding paper. It is aggressive enough to correct the paint with any machine and pad combination. This precisely engineered compound simply delivers true paint perfection in the absolute shortest amount of time. What’s more? The low-dusting, sun-friendly formula does not contain solvents or kerosene, making 3D ACA X-Tra Cut Compound safe and easy to use, perfect for professional detailers and car care enthusiasts alike!

To achieve true paint correction and perfect finish as quickly as possible, turn to 3D ACA X-Tra Cut Compound, it can be used as a powerful combination with 3D Finishing Polish to reveal an unparallel showroom finish that everyone is impressed.

Precautions:

  • Do not use for cleaning hands, body, face and food
  • In case of contact with skin, wash with plenty of water
  • Keep container closed
  • Store in a cool, dry place
  • Keep away from children

Step by Step:

  1. Shake well before use
  2. Apply 3D ACA X-Tra Cut Compound either with a 3D Wool or Foam pad, depends on the level of cut needed
  3. Put 4-5 pea-sized drops on the selected pad
  4. Set the polishing machine, for rotary, set between 800-1800 rpm; while for dual action polisher, set to speed 4-5
  5. Work in a 2” x2” area, buff slowly in a back and forth overlapping motions until the correction is complete
  6. Wipe off any residue with a clean microfiber towel
0.2.69 © 2013-2022 Nice Car HK Limited